How do I check the ball feed and hopper on a batting cage’s pitching machines?
Run each machine through a full hopper and watch the feed. Listen for grinding, note any jams or double feeds, and check the hopper for cracks, rough edges and rust. Then ask how often it jams, how it is cleared and which parts the seller replaces most. The answers show how much attention each machine needs.
Fill a hopper and run the machine for several minutes. Watch how balls drop into the feed, whether they arrive at an even pace and how the machine behaves as the hopper empties. Look at the hopper itself for cracked plastic, bent metal, rough seams and ball marks. Repeat the test on more than one machine, since each may behave differently.
Next, ask about balls. How many are in circulation, how are worn ones removed and where are they stored? A hopper full of tired balls can jam more often. Ask who clears jams, how long that takes and whether lanes close while it happens. Request any records of repairs and the names of the suppliers for parts.
Finally, ask how the seller plans for replacement. Some machines last for many seasons with care and some are worn out earlier. Your accountant can help you plan the cost of replacements. List the machines, noting which are owned and which are leased, and have your lawyer review the paperwork and service agreements. Ask to see the manuals too, as they may show which parts are expected to wear. Photograph the machines and note their serial numbers so you can match them to the equipment list.
Key takeaways
- Run each machine with a full hopper and watch the feed until it empties.
- Check the hopper for cracks, rust and rough edges.
- Ask who clears jams, how long it takes and what parts fail.
Related reading
12 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow do I check a batting cage’s pitching machines and what they cost to repair?
- Expert answerHow do I check the turf and pitching mound wear in a batting cage?
- Expert answerHow do I check the pin deck and ball return noises that signal wear in a bowling alley?
- Expert answerHow do I check the sealing and drink-making machines at a bubble tea shop?
- Expert answerHow do I see whether a small cinema’s popcorn machines and warmers are well kept?
- Expert answerWhat should I ask about an arcade’s game ownership versus revenue-share machines?
- Expert answerWhat should I ask about a batting cage’s lane scheduling for leagues and camps?
Buying
- Expert answerHow do I check the arm and wheel wear on a batting cage’s pitching machines?
- Expert answerHow do I check a driving range’s ball dispenser and ball picker machines?
- Expert answerWhat should I check about a bowling alley’s ball and shoe inventory?
- Expert answerWhat should I ask about a moulding plant’s material dryers and hoppers?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.