What should I ask about a moulding plant’s material dryers and hoppers?
Ask which materials need drying, how the plant confirms resin is dry enough, and how dryers and hoppers are cleaned between materials. Look for dedicated equipment, written routines and operators who can explain them. Wet or contaminated material shows up as rejects.
Start with the materials. Which resins does the plant run, and which of them need drying? Ask how drying time and temperature are chosen and recorded. Ask whether a moisture check is made before the material goes on the machine, or whether the plant relies on habit. The honest answer is revealing.
Look at the equipment. Check the dryers, filters, hoses and hoppers for dust, leaks or makeshift repairs. Ask how often the filters are changed and who does it. Ask how changing from one material to another is handled, because leftover resin in a hopper or hose causes contamination that looks like a machine fault.
Then connect equipment to results. Ask for reject records and see whether spikes line up with material changes or humid weather. Ask how material is stored, labelled and rotated. Talk to the operators, not only the owner, about what they do when parts look wrong. A plant that treats the material side as part of quality is easier to trust. Ask what the plant does with regrind, and whether it is mixed back in consistently. Ask what the operators do on a humid day, and whether any dryer is known to be unreliable.
Key takeaways
- Ask which resins need drying and how dryness is confirmed.
- Inspect dryers, filters and hoppers for dust, leaks and patch repairs.
- Ask how material changes are cleaned out.
- Compare reject records with material changes.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I assess the downtime records of a plastics moulding plant’s chillers and dryers?
- Expert answerHow do I check a plastics plant’s regrind and scrap handling practice?
- Expert answerHow do I find a plastic injection moulding shop for sale in Canada?
- Expert answerWhat should I check about a screen printing shop’s dryer, press and exposure unit?
- GuideBuying an injection moulding company in Canada
Due diligence
- Expert answerHow do I check a plastics moulder’s resin supply and material handling system?
- Expert answerHow do I judge the age and tonnage mix of a plastics plant’s moulding presses?
- GuideInjection moulding company due diligence
- Expert answerHow do I check the lint, ironer and dryer maintenance routine at a laundry plant?
- Expert answerHow do I check a paintball field’s mask and hopper replacement cycle?
- Expert answerHow do I check the ball feed and hopper on a batting cage’s pitching machines?
Financing
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.