How do I check the tire wear and brake pads on a bicycle rental fleet?
Pick a sample of bikes yourself and check each tire for worn tread, cracks and flat spots, and each brake for thin pads, uneven wear and a firm lever. Do not accept a pre-selected few. Then ask how often the shop checks every bike and where it records the work.
Choose the bikes yourself, ideally some from the back of the lot as well as the front. Run a hand around each tire and look for cracks in the sidewall, worn centres and embedded debris. Squeeze the brake levers: they should feel firm, return smoothly and stop the wheel without noise. Look into the calipers or discs to see how much pad is left and whether the wear is even.
A good fleet shows a pattern. If many bikes have the same tired tires or thin pads, the shop may be running behind on routine work. Ask when the last full check was done and whether the shop keeps a sheet for each bike. Compare what you find with the paperwork.
Then ask how the shop decides to replace parts before they fail, and who has the authority to pull a bike. Ask what it costs the shop to fit a set of tires and pads across the fleet, and whether the books show it as a regular expense or one that has been put off. An independent mechanic can help you size up the work. Also ask what the shop does when it finds a worn part mid-season, and how quickly the bike is back in service.
Key takeaways
- Choose your own sample of bikes, including some from the back of the lot.
- Check tire sidewalls and tread, brake pad thickness and lever feel.
- Ask when the last full check was done and whether it is recorded bike by bike.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow do I check where a bike rental shop stores its fleet over winter?
- Expert answerHow do I judge the age and condition of a bike shop’s rental fleet?
- Expert answerHow do I check an event rental company’s storage warehouse for wear or pests?
- Expert answerHow do I check a tent rental company’s trucks and trailers for wear?
- Expert answerHow do I check a detailing studio’s habit of reordering compounds and pads?
- Expert answerHow do I check the garment inventory and wear cycle at a uniform rental company?
Buying
- Expert answerShould a formal wear shop own its rental tuxedos or use a wholesale rental supplier?
- Expert answerHow do I assess an outdoor store’s rental gear fleet and repair program?
- Expert answerHow do I check fleet age before buying a truck or trailer rental business?
- Expert answerHow do I inspect the batteries and age of a golf cart rental fleet?
- Expert answerHow do I inspect the fleet of an equipment rental yard before buying?
- Expert answerHow do I inspect a kayak rental business’s fleet of boats and paddles?
- Expert answerHow do I judge the age of an equipment rental fleet and its replacement cycle?
- Expert answerHow do I check the arm and wheel wear on a batting cage’s pitching machines?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.