How do I judge the ceiling height and floor load of an exhibit storage warehouse?
Measure the usable clear height under the lowest obstruction, not the roof peak, and compare it with the crates and racks you expect to use. For the floor, ask what it was built to carry and whether anyone has checked it. Have an engineer or qualified professional confirm any limit before you rely on it.
Bring a measuring tool and check clear height at several points, particularly under lights, sprinklers, ducting and beams. Compare the lowest point with the tallest crate and the racking you plan to use, and have a qualified professional confirm the usable stacking height, including any clearance needed below the sprinklers. Leave room for the lift, since a stack that fits on paper may not be reachable. Write each measurement on your plan with its location, so you can compare bays later.
For the floor, look for cracks, settling, patched areas and worn surfaces, especially where heavy loads and forklifts travel. Ask what the floor was designed to carry and whether any assessment is on file. Do not guess; ask a qualified professional what the numbers mean for your use.
Look at the racking as well. Ask who installed it, whether it has been inspected and whether any damage has been noted. Check the aisle widths against your lift. Consider what a layout change would cost if the present one does not fit your plan. Have your lawyer review the lease, and ask your accountant how improvements would be handled in the books. Make any assumptions in your plan match what you verified.
Key takeaways
- Measure clear height under obstructions, not at the roof peak.
- Ask a qualified professional what the floor can carry.
- Check racking, aisles and lift reach against your plan.
- Write down every measurement and where you took it.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow do I find out how a trade show exhibit company manages show-floor deadlines?
- Expert answerHow do I check an event rental company’s storage warehouse for wear or pests?
- Expert answerHow do I look at a moving company’s storage warehouse and packing supplies?
- Expert answerWhat should a buyer check on a patio store’s warehouse storage of unsold sets?
- Expert answerHow do I judge wear on a grain site’s bucket leg, augers and conveyors?
- Expert answerWhat should I check about a classic-car storage facility’s floor, lifts and battery tenders?
Buying
- Expert answerHow do I judge a flooring distributor’s warehouse for moisture and storage damage?
- Expert answerWhat should I ask about a piano dealer’s showroom floor and trade-in instruments?
- Expert answerHow do I check a golf simulator lounge’s ceiling height and swing room per bay?
- Expert answerWhat are the yearly running costs of a cold storage warehouse?
- Expert answerWhat should I check before buying a cold storage warehouse?
- Expert answerHow do I judge a classic-car storage building’s fire detection and dry sprinklers?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.