Deavo
BuyingExpert answer · 1 min read

How do I judge the age and hours on a machine shop’s five-axis mill?

Start with the machine’s own paperwork: the serial plate, the hour meter reading, the service history and the list of major repairs. Hours matter less than how the mill was run and looked after. Compare what the records say with how the machine actually performs on a test part.

A five-axis mill carries much of a shop’s earning power, so give it more attention than the other machines. Ask for the model, year, controller version and the reading on the spindle hour meter, then ask what share of that time was cutting and what share was idle. Request the service log, spindle rebuild records and any crash or collision repairs.

Watch the rotary axes closely. Trunnion backlash, worn bearings and tired probe systems can be costly to put right, so check them as closely as the cutting spindle. Ask for a part to be run while you watch, then have it measured against its drawing. Note any noise, vibration or slow axis movement during the run.

Ask a machinery appraiser or an independent technician to look at the mill before you rely on any figure. Check whether the controller and software are still supported, since an old control can limit what work the shop can quote. List the equipment the business uses, noting which is owned and which is leased, and have your lawyer review the paperwork behind it. Ask too how many operators are trained to program and set up the mill, shown as totals by skill level only, since a mill that few people can run well limits what the shop can take on.

Key takeaways

  • Ask for the hour meter reading, service log and spindle rebuild records, then compare them with a live test cut.
  • Check the rotary axes, probe and controller support, not only the spindle.
  • Have an independent technician examine the mill before you rely on anyone’s description.

Sources

This answer is checked against primary sources. Links were last confirmed on the dates shown.

  1. 01
    Business Development Bank of CanadaGovernment
    How to conduct due diligence when buying a business
    bdc.ca·Checked Oct 21, 2026
  2. 02
    Business Development Bank of CanadaGovernment
    Equipment valuation: How to do it
    bdc.ca·Checked Oct 24, 2026
  3. 03
    Business Development Bank of CanadaGovernment
    What are the steps to buying a business?
    bdc.ca·Checked Oct 21, 2026

Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.