How do I judge a chocolatier’s tempering machine and moulds before buying?
Watch the tempering machine hold chocolate at a steady temperature through a full run, then inspect the moulds for scratches, cloudiness and wear. Ask how old they are, how they are cleaned and stored, and whether replacements are easy to source.
Ask the seller to temper a batch while you watch. Look at how steadily the machine holds temperature, how long it takes to recover after heavy use, and whether the finished pieces have a consistent shine and snap. Ask for service history and find out who repairs it.
Moulds are easy to overlook. Look closely at the cavities for scratches, dulling and cracks, since damage shows up on every finished piece. Ask how they are cleaned and stored, because the wrong cleaning can ruin them. Count which designs are used most and which are rarely touched.
Ask which moulds are custom, seasonal or hard to replace. A special design for a popular line has value only if you can keep producing it. Confirm ownership. If equipment is leased, financed or belongs to a supplier, it may not transfer. An independent assessment of older equipment helps you plan replacement costs and supports your discussions with the seller and any lender. Ask too about the room itself, since temperature and humidity affect results, and notice whether the shop has the cooling and storage space to produce at the pace you plan.
Key takeaways
- Watch a full tempering run and judge consistency and recovery.
- Inspect moulds for scratches and wear, and ask which are custom.
- Confirm ownership of every machine and mould set.
- Check the room’s temperature control and storage as well as the machines.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge a pallet maker’s nailing machines and saws?
- Expert answerHow do I judge a pallet maker’s yard space and lumber stockpile?
- Expert answerHow do I judge a glass shop’s cutting table and tempering supplier setup?
- Expert answerHow do I judge the condition of a machine shop’s CNC spindles before buying?
- Expert answerHow do I find a mould remediation business for sale?
- Expert answerIs buying a mould remediation business different from buying a restoration company?
- Expert answerShould I buy an existing mould remediation business or start one?
- Expert answerWhat should I check before buying a mould inspection business?
- Expert answerHow do I judge the condition of a precast plant’s forms and moulds?
Due diligence
- Expert answerHow do I judge if a sewing school’s sewing machine servicing costs are creeping up?
- Expert answerHow do I judge an orchard’s frost protection and wind machine setup?
- Expert answerWho owns the moulds in a plastics shop and how do I find out before buying?
- Expert answerHow do I judge a foundry’s mould-making and core-making equipment?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.