How do I judge the condition of a precast plant’s forms and moulds?
Look at the working surface of each form for chips, rust, warping and repair marks, then check the edges, hinges and locking hardware. Ask how many pours each form has seen, how it is cleaned and repaired, and which ones are due to be replaced.
Forms and moulds decide the finish and the dimensions of every piece the plant sells. Walk the yard or the bay and look at each form with a good light. Check the faces for pitting and build-up, and the edges for damage. Check that the hinges, wedges and locks work freely. A form that needs force to close may need repair, or may be nearing the end of its life.
Ask for the records. Does the plant log the number of casts per form, the repairs and the cleaning? Ask who repairs them and what they cost in total. Look at finished pieces and compare their finish with the condition of the form. Poor pieces often point to a form that needs work.
Finally, ask about replacement. Which forms are used most, which are specialized, and which would take longest to rebuild? Check drawings exist. Ask whether any are leased or borrowed and have your lawyer review those agreements. Your accountant can help you plan for replacement costs over time. Photograph each form and note a few measurements on a fixed date, then repeat the check later to see whether wear is steady. Note the date of every visit.
Key takeaways
- Inspect form faces, edges, hinges and locks with a good light.
- Ask for a log of casts, cleaning and repairs for each form.
- Identify the forms that would take longest to rebuild and check that drawings exist.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerShould I buy a precast concrete plant or start one?
- Expert answerHow do I find a ready-mix concrete plant for sale?
- Expert answerHow is buying a mini-mix concrete business different from buying a ready-mix plant?
- Expert answerWhat should I check before buying a ready-mix concrete plant?
- Expert answerHow do I judge a chocolatier’s tempering machine and moulds before buying?
- Expert answerHow do I judge a box plant’s die cutter and folder gluer equipment?
- Expert answerHow do I judge a cabinet shop’s CNC router and edgebander condition?
- Expert answerHow do I judge the condition of a machine shop’s CNC spindles before buying?
- Expert answerHow do I judge the condition of a sail loft’s large cutting table and floor?
- Expert answerHow do I judge a fresh pasta maker’s extruder and sheeter condition?
- Expert answerHow do I judge a maple producer’s reverse osmosis filters and pump condition?
- Expert answerHow do I judge a greenhouse’s climate control computer and sensors?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
- 03Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.