How do I judge a maple producer’s reverse osmosis filters and pump condition?
Ask how old the membranes are, how the system has performed in recent seasons and when the pump was last serviced. Then watch it run during sap flow if you can, and ask what a replacement membrane or pump would cost and how long it takes to arrive.
A reverse osmosis system saves time and fuel by taking water out of sap before it reaches the evaporator, so its condition matters. Ask when the membranes were last replaced, how they are cleaned and stored between seasons, and how the owner knows when they are tired. Ask for any notes on sap processed per hour, and whether the rate has dropped over the years. Ask when each membrane was last replaced, how the pump has been serviced, and what the producer would do if the unit failed mid-season.
Then look at the pump. Listen for noise, look for leaks at joints and seals, and ask about the motor’s age and the last service. Request invoices for repairs and parts. Ask who sells and services the equipment, how quickly parts arrive in a busy season, and what the owner keeps on hand as spares.
Think about the whole season. Ask what happens to production when a membrane fails in the middle of a run, and how many days of flow the owner could lose. Ask a person who services maple equipment to look at it with you. Finally, ask your lawyer whether the system is owned or tied to a lender.
Key takeaways
- Ask the age of the membranes, how they are cleaned and how performance has changed.
- Check the pump for noise, leaks and gaps in its service history.
- Ask how a mid-season failure would affect production and what spares are kept.
- Ask your lawyer whether any equipment is leased or financed.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow do I judge a maple evaporator, pans and reverse osmosis unit before buying?
- Expert answerHow do I check the booth filters and spray guns at a powder coating shop?
- Expert answerHow do I check a maple dealer’s stock of filter press supplies and gaskets?
- Expert answerHow do I check a maple dealer’s sap-handling gear like pumps, vacuum and tanks?
Buying
- Expert answerHow do I judge a cabinet shop’s CNC router and edgebander condition?
- Expert answerHow do I judge the condition of a machine shop’s CNC spindles before buying?
- Expert answerHow do I check where a rewind shop’s pump motor repairs come from?
- Expert answerHow can I judge the condition of a laundromat’s seating, signs and washroom?
- Expert answerHow do I judge a bakery’s deck oven and proofer condition?
- Expert answerHow do I judge a butcher shop’s saw, grinder and slicer condition?
- Expert answerHow do I judge a butcher shop’s walk-in cooler and meat saw condition?
- Expert answerHow do I judge the condition of an airport shuttle’s vans and passenger seating?
- Expert answerHow do I judge the condition of an axe-throwing venue’s targets and lanes?
- Expert answerHow do I judge the condition of a campground’s roads and washroom buildings?
- Expert answerHow do I judge the showroom and warehouse space of a maple equipment dealer?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
- 03Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.