How do I judge the paint or galvanizing line at a livestock equipment maker?
Look at finish quality on recent products, then at the booth, oven, tanks or racks that produce it. Ask about throughput, upkeep and who runs the line. If the shop sends finishing out, compare the cost and the delay with what an in-house line would take.
Start with the finish. Look at finished gates and panels in the yard: coverage at welds and edges, runs, bare spots and early rust. Ask how the shop handles complaints about finish. Poor prep is often the reason, so ask how steel is cleaned and prepared before coating.
Next, look at the line itself. For paint, check the booth, filters, spray gear, curing area and drying space. For galvanizing, ask whether the shop runs its own bath or uses an outside provider. Look for cracked linings, worn racks, patched equipment and housekeeping. Ask for the upkeep history and any major repairs.
Then ask who runs it and how much it handles. If one person knows the process, a handover risk exists. Ask how long a typical batch takes and whether finishing is a bottleneck that holds up deliveries. Review any equipment loans or leases with your lawyer. Ask your accountant how the line is carried on the books, and what replacing it would take. Ask whether a backup option exists for finishing when the line is down, and how long a stoppage could be absorbed before deliveries slip. Ask about consumables, such as filters, hooks and racks, and how they are reordered.
Key takeaways
- Inspect finished products for edge coverage, runs and early rust.
- Ask who runs the line and whether the knowledge is written down.
- Find out whether finishing holds up deliveries.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge the paint striping equipment used by a line painting company?
- Expert answerHow do I judge the folding and finishing line at a linen service plant?
- Expert answerHow do I judge the condition of a paint store’s shaker and can-sealing equipment?
- Expert answerHow do I judge a prepared-soup maker’s kettle and chilling equipment?
- Expert answerWhat should I ask about a finishing shop’s pre-treatment wash line upkeep?
- Expert answerHow do I judge the polishing, finishing and sanding equipment in a shoe repair shop?
- Expert answerHow do I check a hardware store’s key-cutting and paint-mixing equipment?
- Expert answerHow do I check a paint store’s tinting machine and colour-matching equipment?
- Expert answerWhich production line equipment should I test at a small co-packer?
Due diligence
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.