How do I judge a screen printer’s screen reclaiming and exposure room?
Walk the screen path from start to finish: reclaiming, drying, coating, exposing and washing out. A tidy, separated room with controlled light and steady results points to a shop that can repeat quality. A messy or improvised setup tells you to look harder at the equipment and the habits behind it.
Ask to see the room while screens are actually being handled. Look at how screens are stripped, rinsed and dried, and whether wet work is kept apart from the coating and exposure area. Dust, stray light and splashed chemicals all show up later as pinholes and poor stencils.
Check the exposure unit and the washout area. Ask how the exposure time is set for a new mesh or emulsion, who sets it, and whether it is written down. A shop that records its settings is easier to hand on than one where a single person simply knows.
Count the screens and ask how many are in use, in storage and past their useful life. Ask the owner what gets replaced and how often. With the seller’s agreement, bring in an experienced screen printer you trust to look at the room with you. Ask your accountant how the equipment is recorded in the books. A few minutes spent watching a full cycle, from stripping an old stencil to a finished washout, tells you more than any description the seller gives you. Ask what happens to a screen that fails, and how long a rebuilt screen takes to get back into use on a busy week.
Key takeaways
- Watch screens being reclaimed and exposed during a working day, not only the empty room afterward.
- Ask whether exposure settings and emulsion handling are written down so another person can follow them.
- With the seller’s agreement, have an experienced screen printer you trust look over the room before you form a view.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerWhat should I check about a screen printing shop’s dryer, press and exposure unit?
- Expert answerHow do I check a screen printing shop’s direct-to-garment printer maintenance history?
- Expert answerHow do I judge a print shop’s wide-format printer ink and media costs?
- Expert answerHow do I assess the wide-format printers and routers in a sign shop?
- Expert answerHow do I check the vinyl cutters and printers at a sign shop?
- Expert answerWhat should I ask about the outsourced work a print shop sends to other printers?
- Expert answerHow do I judge a hardware store’s glass cutting and screen repair service?
- Expert answerHow do I judge the state of a bowling alley’s scoring system and screens?
- Expert answerHow do I assess a cheese shop’s ageing room and cold storage?
- Expert answerWhat should I ask about a coating shop’s blast room and abrasive supply?
- Expert answerWhat should I ask about a spice shop’s blending room and grinding equipment?
Due diligence
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.