How do I judge a window washing company’s squeegee and pole equipment condition?
Inspect the poles, squeegee channels, rubbers, buckets and harness-related gear in person. Worn rubbers are cheap to replace, but cracked poles, tired connectors and missing parts suggest neglect. Ask how often gear is replaced and who keeps track of it.
Ask for a list of the main equipment: telescopic poles, squeegee handles and channels, scrapers, buckets, ladders and any tools used at height. Then inspect them in the same state the crew uses them. Check pole joints and locks, squeegee channels for bends, and storage in the vans.
Rubbers and pads are consumables, so what matters is how they are handled. Ask how often they are swapped and who decides. A crew that works with chewed, hard rubbers leaves streaks, and that costs repeat business. Ask whether there are spare sets on every van.
Look at gear used for working at height. Ask what the business checks, how often and who writes it down, and what training the crew has. Check with your lawyer or the workplace safety authority where the business operates on what is required, rather than assuming what is enough, and ask an insurance adviser to review the records. Last, ask whether any items are leased or financed, and have your lawyer review the paperwork. Compare the equipment list with the books through your accountant so that nothing is counted twice or missing. Also ask what a full replacement set would involve, and whether the crew buys its own tools or the business supplies them.
Key takeaways
- Inspect poles, joints, channels and storage in the vans.
- Ask how often rubbers are replaced and who decides.
- Review what the business checks and records for gear used at height.
- Have your lawyer review any lease or financing paperwork.
Related reading
12 pages on the same subject, grouped by topic.
Due diligence
Buying
- Expert answerHow do I check a window cleaning company’s water-fed pole and purified water setup?
- Expert answerWhich gutter cleaning vacuum and extension pole equipment should I inspect before buying?
- Expert answerHow do I judge a gutter cleaning company’s reliance on mild-weather scheduling windows?
- Expert answerHow do I assess a pressure washing company’s trailer, generator and hot water unit condition?
- Expert answerHow do I judge a carpet cleaning company’s mix of residential and restoration work?
- Expert answerDo a window cleaning company’s home clients book year after year?
- Expert answerHow are a window cleaning company’s ladders and poles inspected for safety?
- Expert answerHow can I tell if a window cleaning company’s winter work is steady enough?
- Expert answerHow do I assess a window cleaning company’s route of monthly office building accounts?
- Expert answerHow do I check a window cleaning company’s post-storm and post-construction cleaning calls?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.