How do I review a wall-panel plant’s framing tables and nailing equipment?
Check that the framing tables are flat and square, that the nailing equipment places fasteners cleanly and consistently, and that both keep pace with the saws. Ask for service notes, the age of each machine and which unit would stop the plant if it failed.
Begin at the table. Lay a long straightedge across it and check the stops, clamps and squaring features. A table that has drifted turns out panels that do not match the drawings. Ask how often the table is checked, who does it and what the result was last time.
Then look at the nailing equipment. Watch it run. Fasteners should sit evenly and at the right depth, and the machine should not jam often. Ask about the supply of fasteners, the maintenance routine for the nailers and how long a repair typically takes. Ask whether the machine is controlled by software and who looks after that link.
Compare speed to the rest of the plant. If the saws deliver parts faster than the tables can use them, the tables are the limit. Make a short schedule of each machine with age, last service and likely replacement. Ask if anything is leased or financed and have your lawyer review those agreements. A specialist can offer a closer view, and your accountant can plan the cost. Take dated photographs of the table and nailers during a working shift, and keep the measurements with your other notes.
Key takeaways
- Check table flatness and squareness and ask when it was last measured.
- Watch the nailers run and look for uneven depth, jams and slow repairs.
- Compare table speed with the saws and list each machine’s age and service history.
Related reading
13 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check the condition of a quilt shop’s cutting tables and design wall?
- Expert answerHow do I judge a box plant’s die cutter and folder gluer equipment?
- Expert answerHow do I assess a lavender farm’s plant age and distilling equipment?
- Expert answerHow do I judge a pallet maker’s nailing machines and saws?
- Expert answerHow do I check a pool hall’s tables and equipment before buying?
- Expert answerWhat should I inspect on adjusting tables and X-ray equipment at a chiropractic clinic?
- Expert answerWhat should I look at in a massage clinic’s heated tables, hot stones and equipment upkeep?
Due diligence
- Expert answerWhat should I check about a craft store’s custom framing equipment and orders?
- Expert answerHow do I review a garden centre’s guarantee and plant return policy claims?
- Expert answerWhat should I ask about a buffet’s steam tables and food-holding equipment?
- Expert answerHow do I check how a billiards hall’s tables are re-clothed and how long that takes?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.