What flow-testing and pump-testing gear should an irrigation installer own?
An installer should own working flow meters, pressure gauges, electrical testers and a way to record readings on each job. Ask to see the gear, when each item was last checked against a known reference, and how readings are written down and stored with the job file.
Begin with what is on the truck and in the shop. Ask the seller to lay out the flow meters, pressure gauges, amp clamps, voltage and insulation testers and any logging tools. Look for cracked screens, bent probes, sticky gauges and missing leads. Gear that is knocked about should not be trusted to prove a pump is doing its job.
Next, ask how the gear is kept honest. Is it compared against a reference on a schedule, and where is that written down? Ask who is trusted to use each tool and who trained them. Several sets of equipment, one per truck, are a good sign. A single set shared across the crew can slow work in the busy season.
Then follow the readings. Ask the seller to pull a few completed job files with the test results attached and client names removed. Do the numbers get recorded in a consistent way? Ask your accountant how the gear appears on the books, and plan a replacement list for any item that looks near the end of its life. Ask whether the shop also keeps a spare set of key items, since a broken gauge on a busy day can stall a whole crew.
Key takeaways
- Lay out every meter, gauge and tester and look for damage.
- Ask when each was last compared against a reference.
- Review a few job files, pulled with names removed, for consistently recorded results.
Related reading
13 pages on the same subject, grouped by topic.
Buying
- Expert answerWhat should I check about a market garden’s irrigation lines and pump?
- Expert answerWhat should I know about a home theatre installer’s showroom and demo gear?
- Expert answerHow do I judge the thread-checking and testing gear at a fastener distributor?
- Expert answerHow do I assess a hydroponic farm’s backup power for pumps and fans?
- Expert answerHow do I check a hydroponic grower’s nutrient system and pumps before buying?
Due diligence
- Expert answerHow do I check a telecom installer’s test sets and tone tracing gear?
- Expert answerHow do I check an optometry clinic’s dry eye and specialty testing services?
- Expert answerHow do I judge a computer refurbisher’s testing bench and diagnostic tools?
- Expert answerHow do I judge a used goods store’s electronics testing and refurbishing bench?
- Expert answerWhat should I ask about a hearing clinic’s booth and testing equipment calibration records?
- Expert answerWhat should I look at in a taekwondo school’s testing events and what they bring in?
- Expert answerHow do I check the age of an aquarium store’s chillers, pumps and heaters?
- Expert answerWhich lifts, ladders and access gear does a signage installer need to keep running?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.