How do I judge the thread-checking and testing gear at a fastener distributor?
List every gauge and tester on the bench, then ask how each one is kept in good order, who uses it and how often. Gear that is unmarked, unused or never checked against a reference is a sign that checking is more talk than practice.
Thread gauges, calipers, hardness testers and similar tools tell a distributor whether a shipment is what it claims to be. Ask for a list with make, age and what each tool is for. Look at the tools themselves for wear, rust and damage. Ask whether anyone has checked them against a known reference lately, and whether the results are written down.
Then look at the people. Ask who does the checking, how they were trained and whether anyone else can do it. A single skilled person is a risk if they leave. Ask to watch a check being done from start to finish. See whether the result is recorded and where.
Finally, ask whether the gear is used for the work customers need. A distributor selling to demanding customers needs more capable tools than a counter that sells to home repairers. Have an equipment appraiser look at the larger pieces. Ask your accountant how the gear is carried in the books and whether replacements are due. If outside labs are used for some tests, ask what they cost and how often. Ask the seller what the gear cannot do and how those gaps are handled today.
Key takeaways
- List every gauge and tester, with age and purpose.
- Ask when each was last checked against a reference.
- Watch one check from start to finish.
- Ask who else can do the checking if the main person leaves.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge the slow-moving stock in an industrial supply distributor’s warehouse?
- Expert answerHow do I check a threading kiosk’s thread supply, lighting and chair setup?
- Expert answerWhat should I look at in an industrial cleaner’s protective gear inventory?
- Expert answerHow do I judge a wholesale cookie baker’s industrial mixer and oven line?
- Expert answerHow do I judge a bookstore’s returns arrangements with its publishers and distributors?
- Expert answerHow do I judge a promo distributor’s sales reps and their book of accounts?
- Expert answerHow do I judge a promotional products distributor's reliance on a few big suppliers' catalogues?
Due diligence
- Expert answerHow do I check an industrial cleaner’s chemical storage and spill gear?
- Expert answerHow do I assess a welding supply store’s safety gear and apparel sales?
- Expert answerHow do I judge the age and condition of an upholstery studio’s industrial sewing machines?
- Expert answerHow do I judge whether an environmental firm’s work comes from repeat industrial clients?
- Expert answerWhat flow-testing and pump-testing gear should an irrigation installer own?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.