What should I ask about a banner maker’s grommet and hemming machines?
Ask how old each machine is, how much of the shop’s work runs through it, what has been replaced and who repairs it. Then see it run on a sample banner. Worn dies, uneven hems or a machine that only one person can operate are the points to note.
List each machine with its make, model and age: grommet presses, hemming or welding machines, sewing machines for banners and any hand tools that back them up. Ask which carry most of the work in a normal week and which are used rarely. Ask the seller to run a few banners through and look at hem straightness, grommet spacing and how cleanly each grommet sets.
Look at wear. Dies and setters wear down, and a machine in poor adjustment makes uneven work that must be redone. Ask what the shop replaces, how often, and where it buys parts. Check how many spare dies and grommet sizes the shop keeps, and ask for service records. A shop with no records may still be fine, but you have less to go on.
Ask who is trained on each machine and what happens when it fails. Is there a second one, or an outside shop that could finish the job? Get a tradesperson’s opinion on the oldest equipment. Your accountant can say how the machines appear in the books, and your lawyer can review any lease or financing.
Key takeaways
- List each machine with age, use and service history.
- Run sample banners and check hems and grommets.
- Ask about spare dies and where parts are bought.
- Ask who is trained on each machine and what happens if it fails.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge a pallet maker’s nailing machines and saws?
- Expert answerHow do I assess the stationary machines in a woodworking shop?
- Expert answerHow do I find out whether an embroidery shop’s machines are running most days?
- Expert answerHow do I judge a machine shop’s mix of manual lathes and CNC machines?
- Expert answerWhat should I ask about an industrial distributor’s vending machines at customer plants?
- Expert answerWhat should I ask about a leather workshop’s skiving and stitching machines?
- Expert answerHow do I assess a spring maker’s coiling machines before buying the business?
Due diligence
- Expert answerHow do I check a candy maker’s cooking kettles and wrapping machines?
- Expert answerHow do I check a canvas shop’s zipper, snap and grommet hardware supply?
- Expert answerHow do I check a contract packager’s counting and weighing machines?
- Expert answerHow do I judge a canvas shop’s heavy walking-foot sewing machines?
- Expert answerHow do I judge a motor rewinding shop’s winding machines and burnout oven?
- Expert answerHow can I judge the bench tools and timing machines in a watch repair shop?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.