How do I assess a spring maker’s coiling machines before buying the business?
Check each coiler’s age, make, controls and tooling, then compare its output samples against drawings. Review service records and spare parts, and look at utilization by machine as a total. Because a spring shop’s capacity rests on a few machines, a qualified technician should inspect them with you.
Make a list of every coiling machine with its make, age, wire range and controller. Ask which are the workhorses and which sit idle. A shop that depends on one old machine for most of its output carries more risk than one with several in steady use.
Inspect the tooling and the wear points: wire guides, coiling points, arbors, feed rolls and cutters. Look at sample springs from each machine and measure them against the drawings. Variation along a batch can point to worn tooling or a tired control. Ask for service records and the spare parts on hand. Ask how long the longest breakdown lasted and what caused it. Note which parts are no longer made, since that can turn a small repair into a long one.
Ask for utilization by machine, as hours per week and totals by product type, with customer names removed. Your accountant can help you read it alongside the shop’s ratios, such as margins and equipment cost per hour. Finally, bring a qualified technician. List the equipment the business uses, noting which is owned and which is leased, and have your lawyer review the paperwork behind it. Photograph the controller screens and the nameplates so you can compare notes later.
Key takeaways
- List each machine with its make, age, wire range and controller.
- Measure sample springs against drawings and look for variation along a batch.
- Ask for utilization by machine and service records, including the longest breakdown.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I inspect the embroidery machines at a cap and hat maker?
- Expert answerHow do I inspect the heavy-duty machines at a custom bag and tote maker?
- Expert answerHow do I judge a pallet maker’s nailing machines and saws?
- Expert answerHow do I assess a canoe builder’s forms, strip-building jigs and clamps?
- Expert answerHow do I assess a cushion maker’s packing and shipping setup for bulky items?
- Expert answerHow do I assess a custom crate maker’s engineering drawings and sizing tools?
- Expert answerHow do I assess a granola maker’s baking ovens and cooling racks?
- Expert answerHow do I assess a guitar maker’s jigs, bending moulds and routing templates?
- Expert answerHow do I assess a window maker’s welder, cleaner and cutting line?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.