How do I assess a guitar maker’s jigs, bending moulds and routing templates?
Ask for an inventory of every jig, bending mould and routing template, with what each one makes and who built it. Then check condition, wear and storage. The tooling is what lets a shop repeat its models, so it deserves the same attention as the machines.
Tooling in a guitar shop is often homemade and often undocumented. Ask the seller to lay out each jig, mould and template next to the model it produces. Look for edges that have worn, templates that have been recut, and moulds with cracks or repairs. A tool that has drifted from its original shape produces instruments that drift too.
Ask which tools were built by the seller and which were bought. Homemade tooling is harder to replace, so ask whether drawings, measurements or spare templates exist. If the only record is the object itself, a single accident could end a model line. Photograph and measure the key pieces, and ask whether the seller has a master set kept apart from the working set.
Think about how the tooling fits your plans. Models you do not intend to build make some tools less useful. Your accountant can help you decide how shop-made tooling should appear in the equipment list. A qualified woodworker or builder can look at the set with you before you decide. Also ask where the tools are stored, since a mould kept in a damp corner or hung from one point can warp, and a warped mould quietly changes every instrument that follows.
Key takeaways
- Match each jig, mould and template to the model it makes, and note its wear.
- Ask whether drawings, measurements or master copies exist for shop-made tooling.
- Sort tools into those you need, those you may not, and those you cannot replace.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I assess a music store’s guitar and amp showroom inventory?
- Expert answerHow do I assess a cushion maker’s packing and shipping setup for bulky items?
- Expert answerHow do I assess a custom crate maker’s engineering drawings and sizing tools?
- Expert answerHow do I assess a granola maker’s baking ovens and cooling racks?
- Expert answerHow do I check a sign fabricator’s channel letter bending and lighting work?
- Expert answerHow do I assess a spring maker’s coiling machines before buying the business?
Due diligence
- Expert answerHow do I assess how a leather goods maker handles repair requests?
- Expert answerHow do I assess a jewellery maker’s waste metal and filings recovery?
- Expert answerHow do I assess the lead times a cap maker quotes for custom orders?
- Expert answerHow do I assess a pet bed maker’s returns and defects tracking?
- Expert answerHow do I assess a craft studio's marketing through local makers' markets?
- Expert answerHow do I assess a hardware maker’s exposure to obsolete components?
- Expert answerHow do I assess a hardware maker’s repair and returns bench?
- Expert answerWhat should I ask about a channel-letter shop’s bending and LED module supply?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.