How do I assess a hardware maker’s exposure to obsolete components?
Go through the bill of materials line by line and mark any part that has a single source, an end-of-life notice or no approved alternate. Then compare stock on hand with how fast each part is used. The risk is a product that cannot be rebuilt without a redesign.
Begin with the parts list for the products that earn the most. For each component, ask who makes it, whether it has an approved alternate and whether the maker has announced it is winding down. Ask the seller how notices are tracked, and whether anyone owns that task or it simply waits for a supplier to send a letter.
Next, look at stock. Parts bought in bulk to protect against a discontinuation can be a smart hedge, but they also tie up cash and can sit unused. Ask your accountant how the books carry that stock and whether any of it is slow-moving or needs a write-down. Count some items yourself rather than trusting the stock report.
Finally, ask what a forced change would involve. Would a replacement part need a board change, new firmware or fresh testing? If the original designer is no longer around, the cost of that work grows. A plan that names alternates and design owners is a good sign. Ask also how the maker decides when to place a last-time order and how big it should be. Look at past examples and see whether the quantities matched later demand. Overbuying leaves cash tied up, and underbuying leaves customers waiting, so the track record shows how well the firm plans.
Key takeaways
- Mark every part with one source, an end-of-life notice or no alternate.
- Count stock yourself and ask your accountant about slow-moving items.
- Ask what a forced part change would mean for design, firmware and testing.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow should I assess a home electronics repair shop’s old stock of salvaged panels and boards?
- Expert answerHow do I assess a hardware store’s chainsaw chain sharpening business?
- Expert answerHow do I assess a hardware store’s paint department and colour matching customers?
- Expert answerHow do I assess a hardware store’s special order and lumber desk business?
- Expert answerHow do I assess a custom crate maker’s engineering drawings and sizing tools?
- Expert answerHow do I assess a granola maker’s baking ovens and cooling racks?
- Expert answerHow do I judge a door maker’s finishing line and hardware stock?
- Expert answerHow do I assess a guitar maker’s jigs, bending moulds and routing templates?
Due diligence
- Expert answerHow do I assess a craft studio's marketing through local makers' markets?
- Expert answerHow do I assess how a leather goods maker handles repair requests?
- Expert answerHow do I assess a jewellery maker’s waste metal and filings recovery?
- Expert answerWhat should I ask about a blind installer’s fabric and component suppliers?
- Expert answerHow do I find obsolete stock in a fastener distributor’s shelving?
- Expert answerHow do I review a garage’s parts inventory for obsolete or dead stock?
- Expert answerHow do I check an electronics assembly shop’s component stock for obsolete or slow-moving parts?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat is inventory
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.