How do I judge a door maker’s finishing line and hardware stock?
Follow a door through sanding, finishing and drying and note where work waits. Then count the hardware stock by type and age, and compare it with sales. A tidy finishing line and a hardware shelf that matches demand both show a shop that is run with care.
Begin with the finishing line. Ask the seller to take you through the steps from raw door to finished door: sanding, sealing, coating, drying, inspection. Note which step limits output, often the drying space. Look at the equipment’s condition and upkeep records, and see how many doors can be in each stage at once.
Then look at the finish itself. Compare doors from different batches for even colour and a clean surface. Ask how often work is redone and what that costs in material and time. Ask who sets up the finishes and whether the method is written down. If one person holds the method, plan for a way to record it.
Hardware stock ties up cash, so count it. Ask for stock by type, age and recent use, and look for items that have not moved. Ask your accountant how the stock is recorded and how slow items are treated. If you rely on a line of credit to carry stock, ask your lender how that works. Ask what the seller would clear out first. Ask the seller which hardware lines are growing and which are fading, and what ordering rules the shop uses for each one.
Key takeaways
- Follow a door through every finishing step and find the one that limits output.
- Compare doors from different batches for even colour and a clean surface.
- Count hardware stock by type, age and recent use, and look for items that have not moved.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow do I judge a leather goods maker’s hardware and thread stock?
- Expert answerHow do I judge how often a shower door company’s frameless hardware fails or gets replaced?
- Expert answerHow do I judge a hardware maker’s firmware update process and who maintains it?
- Expert answerHow do I assess a hardware maker’s exposure to obsolete components?
- Expert answerHow do I assess a hardware maker’s repair and returns bench?
- Expert answerHow do I check the condition of a hardware maker’s test fixtures?
- Expert answerWhat should I check about a railing maker’s stock of balusters and metal posts?
- Expert answerWhat should I ask about a wire-form shop’s wire stock and gauge range?
Buying
- Expert answerWhat should I look at in a hot sauce maker’s bottling line before buying?
- Expert answerHow should I review a bag maker’s overseas fabric and hardware lead times?
- Expert answerWhat should I look for when inspecting a storage facility’s roofs and door hardware?
- Expert answerHow do I review a trade show display maker’s portable booth product line?
- Expert answerWhat should I ask about a hardware maker’s component supplier lead times?
- Expert answerHow do I judge the folding and finishing line at a linen service plant?
- Expert answerWhat should I count in a signage installer’s stock of screens and mounting hardware?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
- 03Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.