Deavo
Due diligenceExpert answer · 1 min read

How do I check the condition of a hardware maker’s test fixtures?

Inspect each fixture for worn pins, damaged connectors and loose wiring, then ask for its calibration and repair records. Confirm that drawings and spare parts exist, and ask how the shop knows a fixture is still reading correctly. A fixture nobody can fix or rebuild is a hidden cost.

Test fixtures are easy to overlook because they sit quietly on the bench and may not show up as separate items on the asset list. Walk the line with the seller and ask to see every fixture in use. Look at contact pins, cables and connectors, and ask which ones get replaced most often. Heavy wear on a fixture that is still in daily use tells you something about the next few seasons.

Next, ask how the shop knows a fixture can be trusted. Is there a reference unit that gets run through it on a schedule? Is there a calibration log with dates and initials? A fixture that passes bad units or fails good ones will quietly distort the yield numbers you are relying on.

Finally, ask about drawings, firmware for the fixture and spare boards. Who built it, and could they build another? Ask your accountant how fixtures are recorded in the books, and whether any are leased or financed, and have your lawyer review those agreements. Ask what the fixtures cost to build and how long a replacement would take. If one fixture is the only way to test a top-selling product, a failure stops shipments. A spare, or a documented plan for building one quickly, lowers that risk and belongs in your closing checklist.

Key takeaways

  • Walk the line and look at pins, cables and connectors on every fixture.
  • Ask for calibration logs and a reference unit used to check each one.
  • Confirm drawings and spares exist, and who could rebuild a fixture.

Sources

This answer is checked against primary sources. Links were last confirmed on the dates shown.

  1. 01
    Business Development Bank of CanadaGovernment
    How to conduct due diligence when buying a business
    bdc.ca·Checked Oct 21, 2026
  2. 02
    Business Development Bank of CanadaGovernment
    Equipment valuation: How to do it
    bdc.ca·Checked Oct 24, 2026

Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.