Deavo
BuyingExpert answer · 1 min read

What should I inspect on a utility trailer maker’s jigs and welding fixtures?

Inspect the jigs and fixtures that hold frames in position, because their accuracy shows up in every trailer. Check for bent arms, worn stops, weld spatter and drift from the original dimensions. Ask for the drawings and a record of when each fixture was last checked and corrected.

Start on the floor with the main frame jig. Check that it sits flat and that clamps and stops move freely. Look for repairs, welded patches and places where someone has worked around damage. Ask how the shop checks squareness and how often. A measuring routine with written results is a good sign. A routine that lives in one person’s head is a question to ask.

Next, look at fixtures for smaller parts such as tongues, fenders and ramps. Ask which ones are used every day and which are for special models. Ask who built them, and whether drawings exist. Fixtures with no drawings and a single user are a risk to note.

Last, link the fixtures to the product line. Which models would stop if a fixture failed? How long would a rebuild take? Ask your accountant how fixture costs and replacements fit with the books, and have your lawyer review any agreement that mentions tooling. Photograph each fixture with a tape beside it, and note the date, so that you can compare it with the drawings and the records later. List each jig by trailer model and note its age and any repairs.

Key takeaways

  • Check the main frame jig for flatness, wear, repairs and free-moving clamps.
  • Ask for drawings and a written record of when each fixture was last checked.
  • Find out which models stop if a fixture fails and how long a rebuild takes.

Sources

This answer is checked against primary sources. Links were last confirmed on the dates shown.

  1. 01
    Business Development Bank of CanadaGovernment
    How to conduct due diligence when buying a business
    bdc.ca·Checked Oct 21, 2026
  2. 02
    Business Development Bank of CanadaGovernment
    What are the steps to buying a business?
    bdc.ca·Checked Oct 21, 2026
  3. 03
    Business Development Bank of CanadaGovernment
    Equipment valuation: How to do it
    bdc.ca·Checked Oct 24, 2026

Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.