How do I inspect the embroidery machines at a cap and hat maker?
Run each embroidery machine on a real cap and inspect the stitching, thread breaks and registration, then compare the result with a finished sample. Then ask for service history, the number of heads, and which frames, hoops and attachments come with each one.
Start by listing every machine, its number of heads, its age and what it is used for. Ask the seller to run a sample design on a cap and on a flat piece. Watch for thread breaks, puckering, gaps between colours and designs that drift out of place. A machine that sews cleanly on the first try is a good sign.
Next, check the cap frames and hooping equipment. Caps need special frames, and worn frames cause poor registration. Ask how many frames each machine has and where the spares are stored. Look at the needles, bobbin area and thread paths for lint and build-up, and ask how often they are cleaned.
Then ask for service records and the machine’s run time if the controller shows it. Ask what the last repair was and how long the machine was down. Find out how designs are stored and loaded, and ask your lawyer to review how the designs and software are described in the agreement. An equipment specialist can inspect the machines before you decide. Ask which designs are used most often, since those machines and files carry most of the weight in daily work.
Key takeaways
- Run each machine on a real cap and look at thread breaks and registration.
- Check cap frames, spares and the cleaning routine.
- Ask for service history and the date of the last repair.
- Ask for a photograph of each frame setup the shop uses.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge a pallet maker’s nailing machines and saws?
- Expert answerHow do I find out whether an embroidery shop’s machines are running most days?
- Expert answerHow do I check a multi-head embroidery machine’s stitch count and wear?
- Expert answerDo I need to inspect a commercial cleaning firm’s floor machines before taking over?
- Expert answerHow can I tell if an embroidery shop’s staff can digitize designs without the owner?
- Expert answerHow do I check an embroidery shop’s cash flow during its slow months?
- Expert answerHow do I check an embroidery shop’s thread and backing supplier relationships?
- Expert answerHow do I assess the stationary machines in a woodworking shop?
- Expert answerWhat should I inspect on a utility trailer maker’s jigs and welding fixtures?
- Expert answerHow do I assess a spring maker’s coiling machines before buying the business?
Due diligence
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.