What should I check about a pressure washing company’s pump, hose and surface cleaner wear?
Run the pump under load and watch for pulsing, leaks or a drop in pressure. Then inspect the hoses, fittings, wands and surface cleaners for cracks, flat spots and worn bearings, and ask for service records to see how the equipment has been looked after.
Start with the pump, since it is the costly part. Ask to see it working at full demand for a while, not just a quick test. Listen for knocking, watch for pressure that surges or sags, and look under it for drips. Ask when the seals and oil were last changed, who did the work and whether receipts exist. A pump that has been serviced on a schedule tells you something about the owner.
Hoses and fittings wear in less obvious ways. Run your hands along each length for bulges, cuts and stiff spots, and inspect the ends where they flex. Look at quick-connect fittings, the trigger gun and any swivels. On surface cleaners, check the spinning arm, the nozzles, the housing and the wheels. A worn unit leaves stripes, which customers notice.
Ask how many sets of each item the crews own and what they replace most often. Ask what the owner would buy first if money were no object, as the answer may show what is nearly finished. Confirm which items are included in the sale and whether any are financed. If the equipment is a large part of the deal, consider an independent appraisal.
Key takeaways
- Run the pump under sustained load, not a quick demonstration.
- Inspect hoses, fittings and surface cleaner parts for wear that shows up on the work.
- Ask for service receipts and confirm which items are included and whether any are financed.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I find out how weather swings affect a pressure washing company’s calendar?
- Expert answerHow do I assess a hydroponic farm’s backup power for pumps and fans?
- Expert answerHow do I judge the wear on a dog daycare’s rubber flooring and play yard surface?
- Expert answerHow do I judge a carpet cleaner’s van, hoses and generator wear?
- Expert answerHow do I check an industrial cleaning company’s vacuum trucks and pressure washers?
- Expert answerHow do I check a basement waterproofing company’s sump pump stock and installation method?
- Expert answerHow do I judge the wear on a paving company’s paver screed and rollers?
- Expert answerWhat should I know about a pressure washer’s surface cleaner and nozzle inventory?
Due diligence
- Expert answerWhat do before-and-after photo libraries add to a pressure washing company’s sale?
- Expert answerHow do I check an event lighting company’s power cabling and dimmer gear?
- Expert answerHow do I check an excavation company’s dewatering pumps and shoring supplies?
- Expert answerWhat should I know about a concrete company’s pump truck and boom operator crews?
- Expert answerHow do I find out if a pressure washing company’s results hold up after a few months?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.