How do I judge the wear on a dog daycare’s rubber flooring and play yard surface?
Walk every play area slowly and look for cracks, curling seams, thin patches, pooling and lingering odour, then check the yard for uneven ground, bare patches and drainage. Ask when each surface was installed or repaired. Wear gathers at doors and gates, so start there and plan replacement into your budget.
Start indoors. Look along the seams for lifting and gaps where moisture can get under the mats. Press on soft spots and look at the edges near walls and drains. Note any cuts or tears that dogs could chew. Smell is a clue as well; a floor that smells even after cleaning may be soaking up more than the surface layer. Ask how it is cleaned and which products are used.
Then go outdoors. Look at the yard surface in the places dogs run, wait and dig: gates, fences and corners. Check for puddles after rain, loose material, sharp edges and anything slick. Ask how the surface is raked, topped up or washed, and whether the yard has needed repairs after heavy use.
Finally, ask for the history and the plan. Request installation dates, invoices, warranties and quotes for future work. Ask the owner what they would replace first. A flooring contractor can estimate the cost of replacing worn areas, and your accountant can help you plan for it. Take photographs of each area so you can compare them again before closing, and ask whether the cleaning routine has changed lately; a new product can wear a surface faster than the old one did.
Key takeaways
- Walk seams, doorways, drains, gates and corners where wear concentrates.
- Ask for installation dates, repair invoices and replacement quotes.
- Photograph each area now and compare it before closing.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check a dog daycare’s staff-to-dog ratio on a busy day?
- Expert answerHow do I check wear and tear on a children’s indoor play centre’s equipment?
- Expert answerHow do I judge a carpet cleaner’s van, hoses and generator wear?
- Expert answerHow do I judge a pizzeria’s dough mixer and deck oven wear?
- Expert answerHow do I judge the safety incident log of an indoor play centre?
- Expert answerHow do I judge the wear on a paving company’s paver screed and rollers?
- Expert answerHow do I judge a flooring store’s warehouse stock of leftover boxes and lot numbers?
- Expert answerHow do I judge a lumber yard’s forklifts, boom trucks and racking?
- Expert answerHow do I judge a pallet maker’s yard space and lumber stockpile?
- Expert answerHow do I judge the safety culture at a scrap yard before buying?
- Expert answerWhat should I check about a pressure washing company’s pump, hose and surface cleaner wear?
- Expert answerHow do I judge a laser tag arena’s wall obstacles and maze wear?
Due diligence
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.