How do I judge a laser tag arena’s wall obstacles and maze wear?
Walk the arena with the lights up and then with the lights low. Check wall panels, corners, paint, ramps, joints and floor edges for cracks, loose fittings and worn spots. Ask what repairs happen between sessions and ask for invoices for past work.
A laser tag arena has to look good in the dark and hold up in the light, so inspect it both ways. First, walk through with the work lights on. Run your hand along walls and obstacles to find loose panels, gouges, splintered edges and exposed fasteners. Look at corners and doorways, where bodies and equipment hit hardest. Check the floor near the walls for lifted edges, sticky patches or damage from repeated impacts.
Then dim the lights and walk it again. Painted details and glowing effects wear unevenly, so look for patches that have gone dull or blotchy. Watch for places where reflective surfaces or damage could interfere with the game. Ask whether any parts of the maze have been moved or rebuilt, and why.
Ask about the routine. Who looks over the arena between sessions? Is there a daily or weekly checklist? What gets fixed immediately and what waits? Ask for repair invoices, a log of closed sections and any notes from staff about trouble spots. Compare what you hear with what you see. A contractor who builds interiors can give you a sense of what the next big rebuild might involve, which is useful to bring to your accountant.
Key takeaways
- Inspect the arena twice: with work lights on and with game lighting.
- Check corners, doorways and floors, where impacts concentrate.
- Request repair invoices and a record of closed sections.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge a grading company’s laser level and GPS machine control gear?
- Expert answerHow do I check the vests and phasers in a laser tag arena before buying?
- Expert answerWhat should I ask about a laser tag arena’s arena layout and fog or lighting effects?
- Expert answerHow do I judge a carpet cleaner’s van, hoses and generator wear?
- Expert answerHow do I judge a pizzeria’s dough mixer and deck oven wear?
- Expert answerHow do I judge a trampoline park’s ninja course and dodgeball court for wear?
- Expert answerHow do I judge the wear on a dog daycare’s rubber flooring and play yard surface?
- Expert answerHow do I judge the wear on a paving company’s paver screed and rollers?
- Expert answerHow do I judge the age and resonator hours of a laser cutting bureau’s machine?
Due diligence
- Expert answerHow do I judge a ski rental shop’s boot-fitting wall and dryer racks?
- Expert answerHow do I check how a laser tag arena stores and charges its battery packs?
- Expert answerHow do I check a laser tag arena’s game scoring software and its support?
- Expert answerHow do I find out how often a laser tag arena’s phasers need recalibrating?
- Expert answerHow do I judge the wear on a photo booth operator’s cases and props?
- Expert answerWhat should I ask about a laser tag arena’s game modes and when they were last updated?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.