What should I check about a sandblasting shop’s compressor and blast pot capacity?
Match supply to demand. A blast pot only performs when the compressor can deliver enough air at the nozzle, so compare the compressor’s rated output with the nozzles, hoses and pots the shop runs together. Then check moisture control, hose condition and pot hardware, since weak links there cost production.
Ask for the compressor’s data plate and the list of every pot, nozzle and hose size in use. A shop that blasts with a worn, oversized nozzle may demand more air than the compressor can provide, and production drops. Watch the pressure at the nozzle while the pot runs; if it sags, the system is short.
Check the compressor itself: age, hours, oil condition, leaks and cooling. Ask how it copes with long, steady blasting runs and when it was last serviced. Look at the aftercooler, the dryer and the drains, because wet air clogs media and ruins the surface finish. Ask how the pot is maintained: the pop-up valve, the seals, the metering valve and the pressure relief.
Then ask about growth. If the shop has a pot sitting unused, find out why. If a second operator runs only part of the day, ask whether the air supply would cope with both blasting at once. Request service records for the compressor and pot. List the equipment the business uses, noting which is owned and which is leased, and have your lawyer review the paperwork behind it. Have a technician examine the compressor before you rely on anyone’s description.
Key takeaways
- Compare the compressor’s rated air volume with the nozzles and pots used together.
- Watch nozzle pressure during a run, and check dryers, drains and hoses.
- Ask whether the air supply could support a second operator at once, and request service records for the compressor and pot.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow is buying a mobile sandblasting business different from buying a blast shop?
- Expert answerWhat should I ask about a coating shop’s blast room and abrasive supply?
- Expert answerWhat should I check about a machine shop’s compressed air and electrical capacity before buying?
- Expert answerHow do I judge an Etsy shop’s handmade production capacity before buying?
- Expert answerHow do I judge an ice cream shop’s line-up and patio capacity on hot days?
- Expert answerHow do I judge a pasta maker’s drying racks and cold storage capacity?
- Expert answerWhat should I check about a sawmill’s planer and kiln drying capacity?
- Expert answerHow do I find a sandblasting or media blasting business for sale?
- Expert answerWhat should I check before buying a hot pot restaurant?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.