What should I check about a seed cleaning plant’s dust collection and bagging line?
Walk the dust collection system from hoods to filters, looking at ducts, fans, filter condition and build-up. Then run the bagging line and check scale accuracy, bag sealing and conveyor tracking. Ask for maintenance records and how often each part is cleaned or replaced.
Dust collection is a daily job, so look for signs of daily care. Follow the ducts from the pick-up points to the collector. Check for dents, loose joints, worn sections and heavy build-up. Look at the filters or bags, fans and motors, and ask how often they are cleaned and replaced. Housekeeping around the equipment says a lot about the operation.
On the bagging line, run a few bags and watch. Check that the scale is steady and calibrated, bags fill evenly, closures hold, and labels land where they should. Look at the conveyors, belts and any automated parts for wear. Ask what fails most often, and how long the line stops when it does.
Consider the numbers as well. Ask whether the plant uses credit, for example to pay for replacements between seasons, and if so how it has been used and what it costs. Your accountant can place maintenance spending in the picture. Have your own technician inspect the system, and confirm in the written agreement which equipment is included, with your lawyer reviewing it. Photograph filters, ducts and the scale display during your visit, and keep your notes together so the condition you saw can be checked against the records later.
Key takeaways
- Follow the dust ducts from pick-up points to the collector and look for build-up and wear.
- Run bags through the line and check scale steadiness, fill and closures.
- Ask what fails most often and how long the line stops when it does.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge a dry cleaner’s garment conveyor and bagging equipment?
- Expert answerHow do I judge the folding and finishing line at a linen service plant?
- Expert answerHow do I judge a bridal shop’s preservation and cleaning service side line?
- Expert answerWhat do dust collection and offcut disposal cost a foam fabricator each month?
- Expert answerWhat should I ask about a millwork shop’s dust collection and sanding stations?
- Expert answerWhat should I look at in a feed store’s bulk storage bins and bagging setup?
Due diligence
- Expert answerHow do I check a rug store’s cleaning and repair service line?
- Expert answerWhat should I ask about a cabinet shop’s dust collection and finishing booth upkeep?
- Expert answerHow do I check a coffee bean retailer’s grinders and bagging equipment?
- Expert answerHow do I check a feed store’s scale, bagging area and pallet racking?
- Expert answerHow do I tell if a comic shop’s bagging and backing board supply is well managed?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.