What should I look for in a CNC lathe’s bar feeder and chip conveyor before buying the shop?
Run the lathe with the bar feeder and chip conveyor working together and watch for jams, bar whip, noise and stalled chips. Then read the maintenance records. These two add-ons often get less attention than the spindle, yet they decide whether the lathe runs unattended or needs constant tending.
The bar feeder first. Look at the guide channel for scoring, the pusher for wear and the bar stock supports for play. A feeder that is out of alignment can leave marks on parts or shake the machine. Ask whether the feeder was made for this lathe or added later, and whether bar diameters change often between jobs.
Next, the chip conveyor. Watch how chips leave the machine with long stringy material and with short broken chips. Look for bent links, a slipping belt, a leaking tank and a worn drive motor. A conveyor that jams often tells you the cutting programs may not break chips well, which is a cost to understand.
Ask for the repair history on both, along with any spare parts the shop holds. Check whether replacement parts are still available from the maker. List the equipment the business uses, noting which is owned and which is leased, and have your lawyer review the paperwork behind it. Ask how many hours the lathe runs lights-out and what the scrap rate looks like on long bar runs, as totals the seller prepares. Those answers show whether the add-ons are earning their place.
Key takeaways
- Run the lathe with feeder and conveyor together and watch for jams, vibration and stalled chips.
- Read the repair history and ask what spare parts the shop holds.
- List both add-ons, noting whether each is owned or leased, for your lawyer to review.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check a machine shop’s chip conveyors and coolant filtration systems?
- Expert answerWhat should I ask about a machine shop’s bar feeders and lights-out running?
- Expert answerHow do I judge a machine shop’s mix of manual lathes and CNC machines?
- Expert answerWhat should I ask about a machine shop’s coolant handling and chip disposal routine?
- Expert answerHow do I judge the age and condition of a nursery’s potting machine and conveyors?
- Expert answerHow do I judge a snack bar maker’s wrapping and packing machine?
- Expert answerHow do I find out how a fish and chips shop buys its haddock and cod?
- Expert answerHow do I gauge how a fish and chips shop copes with a rise in fish costs?
- Expert answerShould I buy a fish and chips franchise or an independent chip shop?
- Expert answerWhat should I check before buying a fish and chips shop?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.