How can I judge a stair shop’s CNC and saw equipment before buying?
List each CNC and saw with its make, age and controls, then test accuracy on sample stair parts such as stringers and treads. Check blade and tooling condition, service history and the dust collection that serves each machine. Add the lease or loan terms on each machine to your checklist.
Begin with a list of every CNC machine and saw: make, age, controls and what each cuts. Stair work needs repeatable angles and cuts, so ask the seller to run a stringer or tread on the CNC and check it against the drawing. Do the same for the saws with a cross-cut or a mitre.
Inspect the details that wear: blades, bits, fences, tracks, vacuum tables and guides. Dull tooling shows up as burning, tear-out and rough edges. Ask how often blades are sharpened or replaced, and look at the spares on hand.
Ask for service records and the longest breakdown. Ask how the shop would cope if the main CNC stopped for a long time, and whether outside cutting would be needed. Check the dust collection too, since it affects both the machines and the room. Finally, ask for any lease or loan on each machine and have your lawyer review the terms. Ask your accountant how much equipment spending the shop has done and what it expects next. A qualified technician can inspect the machines with you. Also ask how the shop checks that its machines stay square over time, and write down the answer for your adviser.
Key takeaways
- Run sample stair parts on the CNC and saws and check them against drawings.
- Inspect blades, bits, fences and vacuum tables for wear.
- Get service records, the longest breakdown and any financing on each machine.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check a millwork shop’s edgebander and panel saw condition?
- Expert answerHow do I check a CNC shop’s probing and tool-setting equipment?
- Expert answerHow do I judge a cabinet shop’s CNC router and edgebander condition?
- Expert answerHow do I judge the condition of a machine shop’s CNC spindles before buying?
- Expert answerHow do I judge a machine shop’s mix of manual lathes and CNC machines?
- GuideBuying a cabinetry and millwork shop in Canada
- Expert answerWhat should I ask about a millwork shop’s dust collection and sanding stations?
Due diligence
- Expert answerHow do I look at a lumber yard’s saw, millwork and custom cutting services?
- Expert answerHow do I judge a countertop fabrication shop’s saw and polishing equipment?
- Expert answerHow do I judge a furniture delivery firm’s damage rate on stairs and elevator jobs?
- GuideCabinetry and millwork shop due diligence
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.