How do I assess a glass fabricator’s cutting table and edging machines?
Watch each machine handle real glass and then inspect the results. Look for clean score lines and breaks on the cutting table, and even, chip-free arrises from the edgers. Wear in wheels, belts, fences and water systems shows quickly, and the maintenance record should explain what you see.
Ask for a run of typical work on the cutting table. Check whether the score is continuous, whether breakout is clean and whether finished sizes stay within the shop’s own tolerances. Look at the head, the oil feed, the table surface and the stops for wear. Any drift in measurement suggests calibration or mechanical problems.
For the edging machines, look at the finish on straight and shaped edges. Inspect wheels, belts and spindles for wear, and watch the coolant: clear, flowing water matters, as does a clean tank and filter. Streaks, chatter marks and chipped corners point to worn or poorly dressed wheels or a machine that has lost alignment.
Ask who services each machine, how often wheels are changed, and what the repair file contains. Request the equipment list with make, model and age, and ask whether any machine is financed. Ask your accountant to read the financial ratios with you, so you see how repair and replacement spending shows up in the numbers. Have a technician inspect the machines, and ask your lawyer to review the equipment schedule in the agreement.
Key takeaways
- Watch real glass go through each machine and measure the results against the shop’s own tolerances.
- Inspect wheels, belts, spindles and water systems for wear.
- Request the repair file and the equipment list, with any financed machines noted, and ask a technician to check calibration.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge a glass shop’s cutting table and tempering supplier setup?
- Expert answerWhat should I ask about a sign shop’s CNC router and cutting table?
- Expert answerHow do I check the cutting and printing machines at a custom sticker shop?
- Expert answerHow do I assess a welding shop’s plasma table, press brake and welder condition?
- Expert answerHow do I assess the stationary machines in a woodworking shop?
- Expert answerWhat should I ask about a fab shop’s plasma table and its consumables use?
- Expert answerHow do I judge a hardware store’s glass cutting and screen repair service?
- Expert answerHow do I keep a stone shop’s fabricators and installers after buying it?
Due diligence
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.