How do I check a leather maker’s strap cutting dies and clicker press?
Test the press and examine the dies. Check that the press cuts evenly, that dies are sharp and straight, and that each die is labelled for the product it makes. A press without good dies, or dies without records, is only half an asset.
Ask the seller to cut a few straps while you watch. Look at the edges of the cut, the pressure across the bed, the cutting board and whether the machine hesitates or leaks fluid. Then inspect the dies: bent edges, rust, nicks and cracks are signs a die may need repair or replacement. Note how many are in active use, and how many only collect dust.
Next, build a die list. Match each die to a product, a customer or a pattern. Ask who made the dies, how long replacements take and what they cost to replace. Custom dies can be tied to one client’s design, so ask which designs the shop made itself and which came from a client, and have your lawyer review the paperwork.
Finally, ask about upkeep. Who services the press, what safety guards are fitted, and who is trained to run it? A worn press and a single trained operator can both hold back the business. Ask how many dies would need replacing soon, and who would cut new ones.
Key takeaways
- Watch the press cut a sample run and check edges and pressure.
- Match each die to a product or customer and see which are still used.
- Ask where the design behind any custom die came from, and review the paperwork with your lawyer.
- Check who services the press and who is trained to run it.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check a commercial printer’s press hours and service history?
- Expert answerHow do I judge a fab shop’s press brake tooling and who can set it up?
- Expert answerWhat should I ask about a packaging company’s printing press and die cutter condition?
- Expert answerWhat should I check about a screen printing shop’s dryer, press and exposure unit?
- Expert answerAre a moving company’s blankets, dollies and straps in good shape?
- Expert answerHow do I check a flatbed trucking company’s tarps, straps and securement gear?
- Expert answerHow do I assess an industrial distributor’s cutting tool and abrasives lines?
- Expert answerWhat should I ask about a sign shop’s CNC router and cutting table?
- Expert answerHow good is a sawmill’s saw filer, and what happens to cutting quality if that person leaves?
- Expert answerWhat should I look for in a banner shop’s wide-format cutting equipment?
- Expert answerHow do I assess a drapery workroom’s pleating and long cutting tables?
Due diligence
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.