How do I judge a fab shop’s press brake tooling and who can set it up?
Ask for a full inventory of punches and dies, then check them against the parts the shop actually bends. Wear, matching sets and storage matter. The bigger risk is people: confirm at least one operator besides the owner can program and set up a complex bend.
Walk the tooling racks with the seller. Check that punches and dies are catalogued, sorted by profile and length, and not chipped or flattened at the nose. Odd single pieces with no partner are a sign tooling has been added job by job. Ask which tools earn their keep and which sit unused year after year.
Compare the tooling with the shop’s work. A shop that bends a lot of tight radii or heavy plate needs different dies than one doing light enclosures. Ask what a missing profile costs in outside work or lost jobs, and whether the brake’s controller still holds the stored bend programs. Ask also how the tooling is stored so it does not get damaged between jobs.
Setup knowledge is usually the real question. Ask who sets up a multi-stage part, how long a new operator takes to become independent, and whether setup sheets exist. Watch a changeover if you can. If everything lives in the owner’s head, plan for a handover period and raise it early in your discussions with the seller. Ask whether the current operators would stay, since their know-how comes with the brake.
Key takeaways
- Inventory the tooling and match it to the work the shop really does.
- Look for wear, orphaned pieces and missing profiles.
- Watch a changeover and ask for written setup sheets.
- Ask who besides the owner can set up a complex part.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I assess a welding shop’s plasma table, press brake and welder condition?
- Expert answerWhat should I check about a screen printing shop’s dryer, press and exposure unit?
- Expert answerHow do I judge whether a fabrication shop’s shop floor layout limits growth?
- Expert answerHow do I find a brake and alignment shop for sale?
- Expert answerWhat should I check before buying a brake and alignment shop?
- Expert answerWhat should I check about a frame shop’s mat cutter and mounting press?
- Expert answerHow do I check a stamping shop’s press feed and coil handling equipment?
Due diligence
- Expert answerHow do I judge a trailer repair shop’s axle, brake and bearing work volume?
- Expert answerHow do I check a machine shop’s tooling inventory and who owns the fixtures?
- Expert answerHow do I check a leather maker’s strap cutting dies and clicker press?
- Expert answerHow do I check a letterpress shop’s press condition and spare parts?
Selling
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.