How do I check a stamping shop’s press feed and coil handling equipment?
Watch the line run, then ask for its records. See whether coil loads smoothly into the feed, whether the straightener keeps strip flat, and whether the line stops often. Compare what you see with the maintenance log, and bring someone who knows presses to look at the parts you cannot judge.
Ask to be at the shop on a normal production day, not a staged one. Follow a coil from the rack to the die. Note how it is lifted, loaded and threaded, how long a changeover takes, and whether operators work around problems or through them. Odd noises, scrap piles near the feed, double hits on the die and hand-made fixes tell you more than a clean floor does.
Then look at the equipment itself. The feed, the straightener, the cradle and the lifting gear each wear in their own ways. Ask for repair invoices, replaced parts and any notes on stoppages. If the list says a feed was rebuilt, ask who did it and when.
Bring an independent technician or a trusted equipment dealer for a proper look, and ask your lawyer whether anything on the line is leased, financed or customer-supplied. Whether it can pass to you at all is a question for the contracts, not for the seller’s word. Finally, ask how a breakdown on the feed would affect deliveries, and whether a spare feed or a back-up arrangement with another shop exists. A line with no fallback carries more risk than one with a plan.
Key takeaways
- Watch a normal shift and follow a coil from rack to die.
- Match what you see against repair invoices and stoppage notes.
- Ask your lawyer whether any of the line is leased, financed or customer-supplied.
Related reading
15 pages on the same subject, grouped by topic.
Buying
Financing
Due diligence
Selling
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.