How do I check the welding and fabrication equipment in a livestock handling equipment shop?
Walk the shop and run the welders, cutters and benches in use. Check age, condition, output and upkeep for each, and whether the shop has enough stations for its busiest weeks. Welds and cuts that come out clean without rework are the best sign the gear is sound.
Begin with a list of every welder, cutter, saw, drill and bench. Ask the age, who services it and when it was last overhauled. Look at leads, torches, regulators, gas lines and grounds. Frayed cables and taped repairs point to equipment kept running past its time. Ask which item the shop can least afford to lose.
Next, watch the work. How clean are the welds, and how much grinding or redoing follows? Ask how the shop keeps quality steady across several welders with different habits. Look at the layout, too: is there room to move long pieces, and are stations placed so work flows from cutting to welding to finishing?
Then think about capacity and replacement. Does the shop turn away work in busy months, or sit idle in quiet ones? Ask which items are owned, financed or leased, and have your lawyer review the written terms. Ask your accountant how the gear is carried on the books, and build a replacement plan for the oldest pieces before you commit. Look at ventilation and extraction around the welding stations, and at how consumables like wire and tips are stored and reordered. A shop that runs short of them is a shop that loses hours.
Key takeaways
- List every machine, its age and last service.
- Look at weld quality and how much rework follows.
- Confirm in writing which gear is owned, financed or leased.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow do I judge a countertop fabrication shop’s saw and polishing equipment?
- Expert answerHow do I check a muffler shop’s pipe bender and exhaust welding equipment?
- Expert answerHow do I assess a custom apparel shop’s rush-order handling?
- Expert answerWhat should I check about an online fabric shop’s bolt storage and handling?
- Expert answerHow do I check the heavy-item handling equipment in a fitness equipment warehouse?
Buying
- Expert answerHow do I assess the fabrication shop equipment at a trade show display builder?
- Expert answerHow do I check a welding shop’s ventilation and fume control equipment?
- Expert answerHow do I assess a farm repair shop’s welding and fabrication capabilities?
- Expert answerHow do I judge a shade installer’s sewing room and fabrication equipment?
- Expert answerWhat should I ask about a fabrication shop’s mobile welding trucks and field work?
- Expert answerHow do I check a stamping shop’s press feed and coil handling equipment?
- Expert answerHow do I assess the corrals, chutes and handling equipment on a cattle ranch?
- Expert answerWhat should I look at in an upfitter’s metal cutting and welding equipment?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.