What should I look at in an upfitter’s metal cutting and welding equipment?
Look at each machine’s age, condition and service record, then see it run. Check the cutting tools, welders, clamps and fixtures, the space and ventilation around them, and how often parts are replaced. Note which items are near the end of their life.
Begin with a simple equipment list: each welder, saw, cutter, grinder and press, with make, model, age and whether it is owned or leased. Ask for service records and watch a few machines run. Listen for roughness, look at cables and torches for wear, and check guards and clamps. Bent fixtures or a patched-together setup can point to an owner who puts off upkeep.
Next, look at the space. Is there room to work on a full-length van, and is the area around welding kept clear? Check ventilation, lighting and how consumables such as wire, gas and blades are stored. Ask who is trained on each machine and how that is written down. A qualified tradesperson can inspect the key items for you.
Then ask about replacement. Which machines would the shop replace soonest, what would that involve, and has any financing been used? Ask your lawyer to review any equipment financing or lease agreement, and ask your accountant how the equipment appears in the statements. Ask when each key machine was last repaired and by whom. Photograph each nameplate and serial plate, and keep the list with your notes, so the details are on hand for the later review.
Key takeaways
- Make a list of each machine with age, whether owned or leased, and service record.
- Watch the key machines run and look at cables, guards and clamps.
- Ask which machines are nearest replacement.
Related reading
13 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check a roadside assistance business’s service vans and jump equipment?
- Expert answerHow do I check the van and cases used to move a DJ company’s equipment?
- Expert answerHow do I check a welding shop’s ventilation and fume control equipment?
- Expert answerHow do I check a hardware store’s key-cutting and paint-mixing equipment?
- Expert answerWhat should I ask about a sticker printer’s die-cutting and plotter equipment?
- Expert answerWhat should I look for in a banner shop’s wide-format cutting equipment?
Due diligence
- Expert answerHow do I check a welding supply store’s filler metal and wire turnover?
- Expert answerHow do I check a muffler shop’s pipe bender and exhaust welding equipment?
- Expert answerHow do I check the welding and fabrication equipment in a livestock handling equipment shop?
- Expert answerHow do I check the cutting and finishing equipment at a paper goods business?
Selling
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.