How do I assess a drapery workroom’s pleating and long cutting tables?
Look at whether the table length and width suit the longest drops the workroom sells, how flat and well kept the surface is, and how the pleating equipment performs on a real job. Ask about repairs, spare parts and how often the tools stand idle.
Walk the floor while a job is under way. Check that the cutting table is long enough for the longest panels without bending cloth around corners, that the surface is flat and clean, and that measuring guides are easy to read and still accurate. Look at the room around it, too. A cramped layout slows every order and shows up as lost time.
For the pleating gear, ask for a demonstration with a fabric the shop uses often. Compare the finished folds against what the showroom would expect, and ask how often the settings need correcting. Request the service history, the list of spare parts, and the name of the person who repairs it. Ask whether the tools suit heavier or lighter cloth, since limits there can narrow the work you can take.
Afterward, ask your accountant how the equipment is recorded in the books, and whether any of it is leased or financed, and confirm the written terms with your lawyer. It also helps to ask how many people work at the tables at once and whether they get in each other’s way. Check lighting over the cutting surface, and ask where finished panels wait. Small layout fixes can raise output without any new equipment.
Key takeaways
- Judge table length against the longest drops the shop sells.
- Watch the pleating gear work on a typical fabric.
- Ask for service history, spare parts and who repairs it.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check a drapery fabric store’s workroom and sewing contractors?
- Expert answerHow do I check the condition of a quilt shop’s cutting tables and design wall?
- Expert answerHow do I assess an industrial distributor’s cutting tool and abrasives lines?
- Expert answerHow good is a sawmill’s saw filer, and what happens to cutting quality if that person leaves?
- Expert answerWhat should I ask about a sign shop’s CNC router and cutting table?
- Expert answerWhat should I ask about a sticker printer’s die-cutting and plotter equipment?
- Expert answerHow do I check a day spa’s massage tables, linens and laundry routine?
- Expert answerHow do I assess a truss plant’s saws, tables and press equipment?
Due diligence
- Expert answerHow do I check an auto upholstery shop’s sewing machines and cutting tables?
- Expert answerHow do I check how a machine shop buys carbide inserts and cutting tools?
- Expert answerHow do I check a leather maker’s strap cutting dies and clicker press?
- Expert answerHow do I check how a billiards hall’s tables are re-clothed and how long that takes?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.