How do I assess a truss plant’s saws, tables and press equipment?
Look at the three groups of equipment in order: the saws that cut the lumber, the tables that hold it, and the presses that join it. Check accuracy, age and service history for each, and ask which would stop production if it failed and how long a replacement would take.
Saws set the accuracy of the whole plant. Ask how often cut lengths and angles are checked against the design and who does the checking. Look at the blades, the fences and the feeding mechanism. Ask whether the saw is tied to the design software and how that link is maintained. Cuts that drift mean rework downstream.
Tables and presses come next. Check that tables are flat, that stops and pins are not worn and that the layout moves with the designs. For presses, ask about the service notes, the alignment checks and any recent repairs. A press or a table that a single person can set up properly is a risk to note.
Finish with a schedule of every major machine: age, hours of use, last service and likely replacement. Ask whether any are leased or financed and have your lawyer review those agreements. A specialist can give a deeper view than a walk-through. Your accountant can help you plan for replacement over time. Ask to see a sample of cut parts measured against the design on a day of your choosing, and keep the measurements with your notes. Keep dated photographs of each nameplate with your notes.
Key takeaways
- Check saws, tables and presses separately for accuracy, wear and service history.
- Ask how the saw links to the design software and who maintains the link.
- Build a schedule of machines with age, last service and likely replacement.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I assess a lavender farm’s plant age and distilling equipment?
- Expert answerHow do I assess the downtime records of a plastics moulding plant’s chillers and dryers?
- Expert answerHow do I assess a packaging plant’s forklift and loading dock setup?
- Expert answerHow do I judge a box plant’s die cutter and folder gluer equipment?
- Expert answerHow do I assess the plant staff mix and training at a commercial laundry?
- Expert answerHow do I assess a drapery workroom’s pleating and long cutting tables?
- Expert answerHow do I check a stamping shop’s press feed and coil handling equipment?
- Expert answerHow do I assess a welding shop’s plasma table, press brake and welder condition?
- Expert answerHow do I check a concrete company’s jackhammers, saws and polishing equipment?
- Expert answerHow do I assess a bedding-plant greenhouse’s benches, trays and flats inventory?
Due diligence
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.