How do I judge the black light paint and arena finishing in a laser tag arena?
Visit with the arena lights on and then with the black lights on. Look for faded or chipped paint, uneven glow, scuffed walls and loose props, and ask when the arena was last repainted. Tired finishing may be a cost you should plan for soon after you take over.
Bring a good flashlight and see the arena twice. With work lights on, look for chips, patched areas, peeling edges, damaged floor coverings and loose panels. With black lights on, check whether the glow looks even or whether some walls are dull. Photograph anything that stands out, so you have a record to discuss with the seller. Switch the black lights on, walk the arena and note any wall that looks faded or patchy.
Then ask about the painting history. Who did the work, what products were used, how often are touch-ups done and where is leftover paint stored? A seller who keeps notes on colours and finishes makes future repairs far easier, because matching glow paint after the fact can be hard.
Think about how the arena is used. Areas with heavy traffic, such as corners, ramps and doorways, wear first. Ask whether the seller has a plan or quote for a refresh, and bring in a contractor for an estimate if the finishing looks tired. Put the work into your plan with your accountant, and have your lawyer review the agreement. Ask the seller whether any spare paint, stencils or props are stored on site, and list them in your notes.
Key takeaways
- Inspect the arena under work lights and under black lights.
- Ask for the painting history, products used and where spare paint is kept.
- Get a contractor’s estimate if the finishing looks tired.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge a laser tag arena’s wall obstacles and maze wear?
- Expert answerHow do I judge a grading company’s laser level and GPS machine control gear?
- Expert answerHow do I judge whether a martial arts school’s black belt students are ready to teach?
- Expert answerHow do I check the vests and phasers in a laser tag arena before buying?
Due diligence
- Expert answerHow do I check how a laser tag arena stores and charges its battery packs?
- Expert answerHow do I check a laser tag arena’s game scoring software and its support?
- Expert answerHow do I find out how often a laser tag arena’s phasers need recalibrating?
- Expert answerWhat should I check about a laser tag arena’s server computers and signal beacons?
- Expert answerWhy does a laser tag arena’s fog machine and haze fluid supply matter to a buyer?
- Expert answerHow do I judge the finishing booth and spray setup at a guitar workshop?
- Expert answerHow do I judge a fixture shop’s layout between machining, finishing and assembly?
- Expert answerHow do I judge a foundry’s fettling and finishing capacity?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.