How do I judge a metal roofing company’s roll-forming machine before buying?
Watch it form panels and then measure them. Check that the profile is true, the length is accurate, the cut is clean and the finish is unmarked. Then inspect rolls, shafts, the cut-off and the controller, and read the repair history for patterns. If the business relies on this machine, test it under load.
Ask for a run of panels in the material the shop sells most. Lay finished panels against each other and against a straightedge. Check rib height, width and bow, and look for scratches or paint marks left by the rolls. Measure several lengths and see if they hold steady.
Look inside. Rolls should show even wear and clean surfaces; scored rolls or loose shafts affect the profile. Check the entry guides, the drive chains or gears, the oil supply and the cut-off die. Ask when the rolls were last reground or replaced, and whether spare rolls exist. Ask what profiles the machine can make and how long a changeover takes.
Then study the controller and the record of downtime. Ask whether the controller is supported, who services it and how long help takes to arrive. If it is the only machine, any stoppage halts production, so ask what the shop does when it is down. Ask your lawyer to confirm in writing that the machine, its spare rolls and its tooling are included, and in what condition.
Key takeaways
- Measure formed panels for profile, length, bow and surface marks across a long run.
- Inspect rolls, cut-off and controller, and ask what spare parts exist and how quickly more can be obtained.
- Ask what the shop does when the machine is down, and how long a repair has usually taken.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge a gutter company’s seamless roll-forming machine and truck setup?
- Expert answerHow do I check a roofing company’s reputation before buying it?
- Expert answerWhat if a roofing company’s work comes mostly from one builder?
- Expert answerWhat should I check about a roofing company’s online reviews before buying?
- Expert answerWho are the roofing company’s crew foremen, and will they work for me?
- Expert answerHow do I judge a grading company’s laser level and GPS machine control gear?
Due diligence
- Expert answerHow can I review a roofing company’s fall protection and safety records?
- Expert answerHow do I review a roofing company’s photos of completed work?
- Expert answerWhat should I ask about a roofing company’s relationship with its shingle supplier?
- Expert answerWhat should I know about a roofing company’s dumpster and lift equipment?
- Expert answerWhat should I ask about a junk removal company’s recycling and scrap metal sales?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.