What should I ask about a boat builder’s shop ventilation and dust extraction setup?
Ask the seller to walk you through the system: where air enters and leaves, what the dust collectors serve, how old each unit is and who looks after it. Ask for service notes and the cost of the last repairs. Then ask what would change if production grew.
Boat shops produce sanding dust, cuttings and fumes in different places, so one system rarely serves the whole building. Ask for a simple sketch showing the extraction points, the collectors and where the air goes. Compare it with where the work actually happens on the floor. Gaps between the two call for a question.
Ask about upkeep. How often are filters and ducts cleaned? Who does it? Are there written notes, and do they match what you see? Look at the condition of the ducting, the noise of the fans and how much dust has settled on beams and ledges. Ask which parts have been replaced recently and which are due.
Then ask about capacity. If the shop added a second shift or a larger model, would the current setup cope? What would an upgrade involve, and who would quote it? Bring in a specialist to look at the system with you, and have your lawyer review the lease. Add the cost of upgrades to your budget talk with your accountant. Write down every answer next to the date you got it, so that you can compare the system with what the seller tells you later in the process.
Key takeaways
- Ask for a simple sketch of extraction points, collectors and airflow, then compare it with the floor.
- Request service notes and look for dust build-up, worn ducting and loud fans.
- Ask what capacity the system has for growth and what an upgrade would involve.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge the ventilation and dust control at a nail salon?
- Expert answerWhat should I ask about a millwork shop’s dust collection and sanding stations?
- Expert answerWhat should I look at in a cabinet shop’s spray finishing room and ventilation?
- Expert answerHow do I assess the fabrication shop equipment at a trade show display builder?
- Expert answerHow do I check a kitchen cabinet shop’s reliance on builders before buying?
- Expert answerHow does a boat repair shop make its money?
- Expert answerWhat should I ask about a kayak rental shop’s storage racks and winter boat care?
- Expert answerWhat should I check before buying a boat repair shop?
- Expert answerHow do I check a tint shop’s clean room and dust control setup?
- Expert answerWhat should I know about a fab shop’s plasma table and fume extraction system?
Selling
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.