How do I check a machine shop’s coordinate measuring machine and its calibration records?
Ask for the machine’s calibration history, the intervals between checks and the reports from whoever performed them. Look at the room, the probe condition and the programs for repeat parts. A CMM that is used often and checked regularly is a stronger asset than one that sits under a cover.
Start with the records. Request each calibration report, the date, the company that did it and what they found or adjusted. Look for steady intervals and an explanation for any gap. Ask what standards or artefacts the shop uses for daily or weekly checks between outside visits.
Then look at the machine and its surroundings. Check the temperature control of the room, the cleanliness of the granite, the condition of the probe and styli, and the air supply. Ask about any collisions and how they were handled. A machine in a dusty, uncontrolled space may not hold the accuracy the paperwork suggests.
Finally, look at how it is used. Ask to see inspection programs for repeat parts and the reports sent to customers. Find out who writes the programs and whether more than one person can run the machine. Ask the shop to measure a part you bring, then compare the result against your own gauge or an outside lab. A qualified metrology person can help you judge it. Ask also how long the machine is down when it fails, and who the shop calls first.
Key takeaways
- Request every calibration report and look for gaps between visits.
- Inspect room conditions, probe condition and air supply.
- Ask who writes the inspection programs and who else can run them.
- Measure a part you supply and compare against an outside result.
Related reading
15 pages on the same subject, grouped by topic.
Selling
Buying
- Expert answerHow do I assess a body shop’s frame machine and measuring system condition?
- Expert answerHow old is the dry cleaner’s solvent machine, and how do I check its service record?
- Expert answerWhat calibration records should a surveying firm keep for its drone and scanning equipment?
- Expert answerHow do I review a self-serve car wash’s coin and card machine collection records?
- Expert answerHow do I check an embroidery shop’s cash flow during its slow months?
- Expert answerWhat does a woodworking shop’s lumber supplier mix say about its stability?
- Expert answerWhat should I look at in a camera repair shop’s calibration and collimation equipment?
- Expert answerWhat should I ask about a canvas shop’s on-site measuring trips to customers?
Due diligence
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.