How do I judge a wrap shop’s large-format printer and laminator condition?
Run a test print and a test lamination, and look at them closely. Banding, colour drift, wrinkles or bubbles point to worn parts or poor upkeep. Then read the service notes, ask about downtime, and bring an independent technician to inspect both machines.
Ask the seller to print a sample with solid colours, fine detail and a gradient, then laminate it. Look for banding, streaks, colour shifts and edge curl. Check the laminator rollers for flat spots or residue, and watch the film feed for wrinkles and tracking drift. Compare the first sample with a second run after the machines have warmed up.
Open the printer with the seller. Look at the capping station, the wiper, the ink lines and the area around the heads for build-up or leaks. Ask about the last head replacement, how often cleaning is done and what supplies are kept on hand. A well-kept machine has a tidy routine, not a repair kit full of improvisations.
Ask for the service history and any downtime log, with costs by category. Compare it with what you see. If the machines are leased or financed, or if software or support is tied to the printer, ask your lawyer to review those agreements. Your accountant can help you judge replacement cost against current spending. Take the sample prints and a photo of the head area home, and ask a technician you trust to look at them before you decide.
Key takeaways
- Run a test print and lamination and look for banding, wrinkles and drift.
- Inspect heads, capping station and rollers with the seller.
- Ask your lawyer to review any lease, financing or support agreement.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerWhat should I look at in a sign supplier’s large-format printer ink supply business?
- Expert answerHow do I judge a print shop’s wide-format printer ink and media costs?
- Expert answerHow do I tell whether a vehicle wrap shop’s profits will last after a sale?
- Expert answerShould I buy an existing vehicle wrap shop or start one?
- Expert answerWhat should I ask about an architecture firm’s model-making shop and large-format plotters?
- Expert answerHow do I assess the wide-format printers and routers in a sign shop?
- Expert answerHow do I judge the condition of a sail loft’s large cutting table and floor?
- Expert answerWhat should I ask about a display maker’s large-format printing supplier?
- Expert answerHow do I judge a blinds business’s install-day vehicle and tool setup?
- Expert answerWhat should I ask about a drafting firm’s plotter and large-format scanner condition?
Selling
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.